Nixer Audio Pro

CV1

CV1

Part no. NIX00653D Dante version
Part no. NIX00653R Ravenna version
Part no. NIX00653M Milan version
Audio over IP Monitoring Unit
  • Compact 1RU rack-mount AoIP monitor
  • 64 AoIP inputs (32 stereo pairs) with simple selection
  • 6.6” colour touchscreen with touch control
  • 2 high-quality headphone outputs (independent volume)
  • Main output rotary control for speakers
  • Supports Dante, Ravenna/AES67, SMPTE 2110 & Milan AVB
  • Line & AES I/O (XLR connections, pre & post out)
  • Hold mode for multiple input monitoring
  • Dual redundant DC power (24V @ 2A, screw-lock)
  • USB-C port for firmware updates
  • Optional remote control adaptor (NixNet, Web UI, iPad app)
CV1 - Data Sheet download
Contact Us

The CV1 is an Audio over IP (AoIP) monitoring unit based around a very compact 1RU 19” rack mounted enclosure. It has been designed for audio personnel working in live events to provide high quality audio monitoring. The front panel has a large volume knob for the main output level control and two independently controllable headphone amps each with an individual volume knob. These are high quality headphone amplifiers and capable of driving into to low impedance headphones.

On the rear panel there are two DC power inputs, a primary RJ45 AoIP port, a secondary RJ45 AoIP port and a Control port. 

There are two 3 pin female XLRs for Line inputs, one 3 pin female XLR input for AES input, one 3 pin male XLR for AES Output, two 3 pin male XLRs for the main output (post the volume control and mute) and two 3 pin male XLRs for the main output (pre the volume control and mute).

The CV1 has 64 AoIP inputs configured in stereo pairs and presented on a 32 switch matrix which allows for listening to one stereo pair at a time. The CV1 units are operated and controlled via the large letterbox colour LCD and capacitive touch panel. The display brightness is programmable to allow for operation in low-light environments without distraction. Hold mode allows for listening to multiple inputs.

A simple, elegant and intuitive to navigate menu system has been designed, allowing the user quick and easy operation.

Firmware updates of the CV1 are achieved via a dedicated USB-C connector on the front panel.

The CV1 can be powered via either of the two 2.5mm DC input connectors requiring 24V @ 2A. These inputs also have a
screw lock to prevent accidental unplugging. Using two inputs provides redundancy.
The NIX00629 (purchased separately) is normally used to power the CV1.

Nixer RP64 AoIP Specifications

Patching of up to 64 inputs to 64 outputs (32 inputs to 32 outputs at 96kHz)

  • AoIP Audio Monitor – 64 AoIP inputs configured in stereo pairs allowing for listening to 1 x stereo pair at a time
    Source selection via front panel display
  • Buttons 1-30 are derived from the AoIP inputs 1 through 30 with user defined names
  • Button 31 is AES input selector, Button 32 is the Stereo line input selector
  • Buttons 31 and 32 can also be alternatively configured to select stereo inputs 31 and 32
    Button names are User Definable from the fro
  • Dante—Fully compatible with New Dante Domain Manager –
  • Ravenna/AES67 compatible
  • SMPTE 2110 compatible
  • Milan AVB
  • 44.1kHz 16 bit
  • 48kHz (64 inputs)
  • 88.2kHz
  • 96kHz (32 inputs)
  • 16 bit
  • 24 bit
  • 32 bit
  • Dual 1Gbps RJ45
  • 1Gbps or 100Mbps operation (Ravenna supports 1Gb only)
  • User configurable for Switched or Redundant operation (Milan no redundant switched currently—contact Sales Office)
  • Network configuration information available via menu
  • Main Stereo Out
  • Aux Out
  • Loop Out of AES Input
  • Loop Out of Line Inputs
  • 1 x Main Output rotary volume control (for driving external loudspeakers)
  • 2 x Headphone Outputs on ¼” sockets, each with rotary volume control
  • 2x Stereo Line Inputs on 3 pin female XLR connectors
  • 1 x AES Input on 3 pin female XLR connector
  • 1 x AES Output on 3 pin male XLR connector
  • 2 x Main Line Output on 3 pin male XLR connector (Pre Volume Control and Mute)
  • 2 x Main Line Output on 3 pin male XLR connector (Post Volume Control and Mute)
  • 2x SFP Ports (Optional)
  • USB port is used for product firmware updates (available on front panel)
  • Control RJ45 on rear for remote control and connection via Nixer NixNet protocol (Not yet implemented—contact Sales)
  • 2.5mm DC inputs socket for use with external
  • 24V 2 Amp adaptor
    Both power inputs can be active at t
  • 6.6” (168mm) diagonal 24-bit colour LCD with 1440xRGBx240 resolution
  • LED backlight (with adjustable display brightness via software)
  • Multi touch capacitive touch overlay with gesture support
  • Dimensions 494mm wide by 120mm deep by 44mm (1RU) height
  • Weight 2.0kg