Nixer Audio Pro

RLC64

RLC64

Part no. NIX00664D Dante version
Part no. NIX00664R Ravenna version
Part no. NIX00664M Milan version

1U 19in Rack Mount AoIP Monitoring Tool and Mixer
  • Compact 1RU 120 mm deep design for portable and fly-away broadcast applications
  • Rapid bootup for fast deployment
  • Perfect for on-site audio confidence monitoring
  • High resolution screen with clear metering and quick source touch screen navigation
  • Separate Mic and AES inputs
  • AES output and headphone
  • Audio IP format defined at time of purchase
RLC64 - Data Sheet download
Contact Us
rl64-front-view

Available in three separate versions;

  • RLC64 Dante for Dante/AES67/ST2110 Network Audio
  • RLC64 Ravenna for Ravenna/AES67/ST2110 with NMOS-04 and -05 support
  • RLC64 Milan for Milan AVB

A 1U 19″ rack mounted AoIP monitoring and mixing unit.

RLC64 allows two modes of operation a mixing mode which can mix up to 64 channels at 48 kHz (32 channels at 96 kHz) plus microphone input (via headphone connector) and AES input to create a 67 into 2 mixer. Alternatively, it can be set into a simple Listen mode where touching a channel instantly routes to the LR output and cancels any previous selection.
The outputs of the LR bus are presented to the user via the inbuilt 4 mm x 9 mm full range speakers or via the 3.5 mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RLC64. The mix output is also routed to the AoIP output.

The RLC64 is operated and controlled via the large letterbox 6.6” diagonal (168 mm) 1440 x 240 24-bit colour LCD and capacitive touch panel.

rl64-screen-shot

A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RLC64 very quickly.
The high-resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.

Firmware updates of the RLC64 are achieved via a dedicated USB micro AB connector on the front panel. There is also a dedicated 3.5 mm jack socket for the headphone output

On the rear of the RLC64 unit there is a Primary and Secondary port for the AoIP input.
The Control RJ45 allows the RLC64 to  be remotely controlled via NixNet.
The Remote RJ45 is a bespoke remote control port for additional accessories (note it is not compatible with ethernet)

The RLC64 can be powered via PoE on the Primary port and/or via the 2.5 mm DC input connectors requiring 24 V @ 2 A. The DC input also have a screw lock to prevent accidental unplugging. Using both the PoE and the DC inout provides redundancy.

The optional NIX00583 or the NIX00629 can be used to power the RLC64

Nixer RLC64 AoIP Specifications

Monitoring of 64 AoIP channels at 48 kHz (32 channels at 96 kHz) Optional fixed 16 channel mode Ability to create a mix of upto 67 inputs (inc mic and AES in) into a Stereo mix

  • AoIP Audio Monitor
  • Dedicated Mix or Listen modes
  • Mix mode allows for Panning and Level control
  • Channels can be configured as Mono or Stereo
  • Main output has 3 band EQ and Limiter
  • Mic input via 3.5mm jack input
  • AES In and AES Out
  • 67 channel meters (16 displayed at a time)
  • High resolution meters switchable scale standards from EBU or SMPTE
  • Monitor Output via Headphone, Built-in speakers, Balanced Line Outputs or AES Out

RLC64 Dante

  • Native Dante 
  • AES67 compatible
  • SMPTE 2110 compatible
  • Fully compatible with New Dante Domain Manager – PD Dante option only


RLC64 Ravenna

  • Native Ravenna 
  • AES67 compatible
  • SMPTE 2110
  • NMOS-04 and -05 Support

RLC64 Milan

  • Milan AVB compatible
    (Currently Primary network support only – contact Sales Office for current updates on redundant network operation)
  • 44.1 kHz
  • 48 kHz
  • 88.2 kHz
  • 96 kHz
  • 16 bit
  • 24 bit
  • 32 bit
  • Dual 1Gbps RJ45
  • 1Gbps or 100Mbps operation (Ravenna supports 1Gb only)
  • User configurable for Switched or Redundant operation
  • Network configuration information available via menu
  • Please note the RLC64 Milan currently only offers a Primary network connection – contact the Sales Office for current updates on redundant network operation 
  • Internal 2W per channel amplifier feeding either
  • 2 x 40 mm x 90 mm full range drivers or
  • 3.5 mm Headphone socket (with microphone input)
  • Headphone output can drive loads from 8 Ohm to 600 Ohm
  • 2 x 3pin male XLR connectors
  • Fed from any input
  • 0 dBFS = +21 dBu maximum output into 600 Ohms
  • Output Mute relays
  • Stereo AES3 Input on 3 pin female XLR connector
  • SRC converts from 44.1 kHz, 48 kHz or 96 kHz to RLC64 sample rate
  • AES3 routing to any output
  • Stereo AES3 output on 3 pin male XLR connector
  • Fed from any input
  • Single RJ45 100 Mbs
  • NixNet remote control of the product
  • Single RJ45 – NOT ethernet
  • Wired remote control option on RJ45 connector
  • For use with optional hardware remote controllers
  • RS485 balanced TX and RX pairs
  • 5V feed to connected device (up to 200 mA)
  • Note: this connector is not compatible with standard ethernet connectors

USB port is also used for product firmware updates

  • PoE (13 W) on Primary RJ45 connector
  • 2.5 mm DC inputs socket for use with external 24 V, 2 Amp adaptor
  • Both power inputs can be active at the same time for redundancy
  • 6.6” (168 mm) diagonal 24-bit colour LCD with 1440 x RGB x 240 resolution
  • LED backlight (adjustable brightness via software)
  • multi touch capacitive touch overlay with gesture support
  • Dimensions 494 mm wide by 120 mm deep by 44 mm height
  • Weight 2.0 kg
  • 19″ rack mounting ears can be removed for desktop use