IB2 SPIDF-Dante
IB2 SPIDF-Dante
Part no. NIX00683
Compact SPDIF to Dante convertor
- Compact 121mm x 23mm x 92mm
- Fixing holes for mounting
- 2ch x 2 ch
- Selectable SPDIF in – Coax or Optical
- SPDIF out on Coax and Optical
- Route 2 channels to and from the Dante network
- PoE
- Web based control interface
A compact SPDIF to Dante conversion box
The front of the IB2 SPDIF- Dante has an RJ45 connector for connecting to the Dante network, accessing the web control interface and for inputting PoE power. It is also possible to power the IB2 SPDIF-Dante via the USB-C connector.
The front of the IB2 SPDIF- Dante has an RJ45 connector for connecting to the Dante network, accessing the web control interface and for inputting PoE power. It is also possible to power the IB2 SPDIF-Dante via the USB-C connector.
Nixer IB2 SPDIF-Dante specifications
Compact SPDIF to Dante conversion box
Convert 2 channels of SPDIF input to Dante and 2 channels of Dante to SPDIF output
- AES67 compatible
- SMPTE 2110 compatible
- Fully compatible with Dante Domain Manager
- 48kHz
- 96kHz
- 16bit
- 24bit
- 32bit
- Single 1Gbps RJ45
- 1Gbps or 100Mbps operation
- Network configuration information available via Dante Controller
- 1x Toslink optical
- 1x RCA
- Active input selectable via Web interface, retains state after a power cycle
- 1x Toslink optical
- 1x RCA
- Both outputs are active at the same time
USB-C port is used as an alternative or additional power input
PoE via RJ45 input and/or USB-C port
- Dimensions 121mm wide by 92mm deep by 23mm height
- Weight 310g