IB2 SPIDF-Dante - compact SPDIF to Dante convertor

Part no. NIX00683

- Compact 121mm x 23mm x 92mm
- Fixing holes for mounting
- 2ch x 2 ch
- Selectable SPDIF in - Coax or Optical
- SPDIF out on Coax and Optical
- Route 2 channels to and from the Dante network
- PoE
- Web based control interface

Stacks Image 22
A compact SPDIF to Dante conversion box

Stacks Image 26
The front of the IB2 SPDIF- Dante has an RJ45 connector for connecting to the Dante network, accessing the web control interface and for inputting PoE power. It is also possible to power the IB2 SPDIF-Dante via the USB-C connector.
Stacks Image 73
On the rear of the IB2 SPDIF-Dante is a Toslink optical input and a RCA input. The active input connector is selectable via a web interface and retains its state after a power cycle. The output is available on both the Toslink optical output connector and the RCA output. Both of these connectors are active at the same time. The 3.5mm jack is for reserved for future use.

Nixer IB2 SPDIF-Dante specifications

Compact SPDIF to Dante conversion box

Functionality

Convert 2 channels of SPDIF input to Dante and 2 channels of Dante to SPDIF output

Dante

AES67 compatible
SMPTE 2110 compatible
Fully compatible with Dante Domain Manager

Sample rates supported

48kHz
96kHz

Bit Depth supported

16bit
24bit
32bit

AoIP inputs

Single 1Gbps RJ45
1Gbps or 100Mbps operation
Network configuration information available via Dante Controller

SPDIF Inputs

1x Toslink optical
1x RCA
Active input selectable via Web interface, retains state after a power cycle

SPDIF Outputs

1x Toslink optical
1x RCA
Both outputs are active at the same time

Other Ports

USB-C port is used as an alternative or additional power input

Power input

PoE via RJ45 input and/or USB-C port

Product Sizes

Dimensions 121mm wide by 92mm deep by 23mm height
Weight 310g